ATPL intergraded

State the airworthiness requirements for a helicopter used on air operations.(CAR 135) correct answer: (a) Each holder of an air operator certificate shall ensure that each aircraft it uses in conducting an air transport operation has a current standard category airworthiness certificate. (b) Each holder of an air operator certificate shall ensure that each aircraft it uses in conducting a commercial transport operation has- (1) a current standard category airworthiness certificate; or ...

In this ATPL summary will you find all you need both for cadet pilot to study for exams and for pilot who want to brush up some performance topics: - Theory for studying, - Tips for exams. Contains both summary of Oxford CAE ATPL books and personal reworked elements. (This summaries will be constantly updated using also buyer's feedback)

ATPL - PRINCIPLES OF FLIGHT Question and answer 20231. Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal c. Thrust is greater than drag and lift is greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal b. These forces are equal 2. The stalling speed of an aeroplane is most affected by: a. Changes...

In this ATPL summary will you find all you need both for cadet pilot to study for exams and for pilot who want to brush up some Radio Navigation topics: - Theory for studying, - Tips for exams. Contains both summary of Oxford CAE ATPL books and personal reworked elements. (This summaries will be constantly updated using also buyer's feedback)

ATPL questions with complete solution 2023What are the forces acting on an aircraft in flight? Drag. Thrust. Lift and Weight What is direct lift control? The elevator / stabilizer provide the direct lift control. What are high lift devices? Trailing edge flaps. Leading edge flaps. Slots Define the two major types or Drag. Profile and induced drag which equals total drag What are high drag devices? Trailing edge flaps, spoilers, landing gear, revere thrust, brakin...

ATPL - AIRLAW ¼ Question with complete solution 20231. Except when cleared by an ATC unit, a VFR flight cannot enter or leave a Control Zone when the cloud base is lower than: a. 1000 feet and less than 8km visibility b. 2000 feet and less than 5km visibility c. 1500 feet or less than 5km visibility d. 1000 feet and less than 5km visibility c. 1500 feet or less than 5km visibility 2. What action should be taken when, during an IFR flight in VMC, you suffer a radio failure? a. R...

In this ATPL summary will you find all you need both for cadet pilot to study for exams and for pilot who want to brush up some powerplant topics: - Theory for studying, - Tips for exams. Contains both summary of Oxford CAE ATPL books and personal reworked elements. (This summaries will be constantly updated using also buyer's feedback)

Saron 2020 ATPL Question and answer rated A+Where there is an increase in power, in level flight, due to an acceleration error inherent within the instru- ment, the attitude indicator will display an apparent climb. In respect of a flight crew member with an air operator, no flight assignment may be accepted where the total flight time conducted by the flight crew member will exceed 300 hours in any 90 consecutive days in the case of an air taxi operation. Airline operator, turbo...

METEOROLOGY • Composition, extent, vertical division Atmosphere 78% nitrogen 21% oxygen 0.9% other gases (carbon dioxide, argon) Lowest layer is tropopause Is split up into layer according the vertical temperature profile Most important constituent in the atmosphere is water vapour Majority of the air is founded in troposphere Tropopause That area where the temperature change doesn’t exceed two-thirds of one degree Celsius per thousand foot increase in altitude ove...

ATPL - Flight Performance and Planning Question with complete solution 2023What affects indicated stall speed? A. Weight, load factor, and power B. Load factor, angle of attack, and power C. Angle of attack, weight, and air density A. Weight, load factor, and power What is load factor? A. Lift multiplied by the total weight B. Lift subtracted from the total weight C. Lift divided by the total weight C. Lift divided by the total weight What is a characteristic of...